Apple-Compatible Dual-Mode ANC Wireless Earbuds

Engineered for consumer electronics brand owners, regional distributors, and Amazon FBA volume buyers, these Apple-compatible dual-mode active noise-canceling wireless earbuds integrate advanced iOS ecosystem interoperability with robust Bluetooth dual-link architecture. Manufactured in our Shenzhen and Dongguan facilities, the hardware architecture utilizes a dual-core SoC configuration to maintain stable multi-device pairing between iOS and macOS hosts.

Available for full OEM/ODM contract manufacturing, including custom firmware flashing, acoustic driver tuning, private-label tooling, and certified export packaging.

 

 

Technical Parameter	Specification Detail
Bluetooth Version	Bluetooth 5.3 (Dual-Mode / LE Audio ready)
Chipset Solution	BES2600 / Realtek RTL8773 (Configurable per BOM requirement)
Supported Protocols	HFP 1.7, HSP 1.2, A2DP 1.3, AVRCP 1.6, BLE
Active Noise Cancellation (ANC)	Hybrid ANC up to -38dB to -42dB noise reduction depth
Acoustic Driver	13mm Titanium-coated dynamic driver diaphragm
Frequency Response	20Hz - 20,000Hz
Microphone Array	6-Mic ENC (Environmental Noise Cancellation) for voice calls
Battery Capacity	Earbuds: 45mAh each / Charging Case: 400mAh (Cobalt oxide cells)
Playback Time	ANC OFF: ~6.5 hours (Single charge) / ~26 hours (Total with case)ANC ON: ~5 hours (Single charge) / ~20 hours (Total with case)
Charging Interface	USB Type-C (Supports 5V/1A fast charge) / Optional Qi Wireless Charging
Charging Time	Earbuds: 1.0 hour / Case: 1.5 hours
Water Resistance	IPX4 (Earbuds chassis ultrasonic welded)
Operating Temperature	-10C to 45C

 

 

Dual-Mode Connection: Supports simultaneous connection to two host devices (e.g., iPhone and MacBook), enabling automatic audio source switching without manual repairing.

Hybrid ANC Architecture: Combines feedforward and feedback microphones to isolate ambient low-frequency rumble and mid-frequency office chatter.

6-Mic ENC Voice Isolation: Dual-ear microphone beamforming algorithm filters wind noise and background interference during VoIP calls and cellular communication.

Low-Latency Game Mode: 60ms ultra-low latency transmission protocol optimized for video playback and synchronized audio-visual media.

In-Ear Detection: Capacitive proximity sensors auto-pause audio playback when earbuds are removed from the ear canal.

 

 

 

Cell Chemistry: High-density lithium-cobalt oxide (LiCoO2) rechargeable cells. Over-charge, over-discharge, and short-circuit protection ICs integrated on the PCM board.

Power Management: Dynamic sleep current consumption under 15uA, extending standby duration in storage.

Cycle Life: Retains >= 80% original capacity after 500 complete charge-discharge cycles under standard 25C test conditions.

 

 

Hardware & Firmware: Custom boot screen logos, pairing name (BLE broadcast name) modification, and customized EQ curve tuning via DSP configuration.

Industrial Design: Color injection molding (Pantone matching), rubberized or metallic UV finish options, and custom laser engraving on housing and charging case.

Packaging Customization: FSC-certified retail box design, multi-language manual printing, and custom accessory kits (silicone ear tip sizes S/M/L included).

MOQ Structure:

• Standard OEM (Logo printing & packaging): 1,000 units per colorway.
• Full ODM (Tooling modification & firmware customization): 5,000 units minimum.

 

 

Production Lines: 4 SMT surface-mount placement lines and 6 final assembly and acoustic testing lines located in our Shenzhen and Dongguan manufacturing bases.

QC Inspection Gates:

• IQC (Incoming Quality Control): 100% spectral testing of speaker drivers and battery capacity verification.
• IPQC (In-Process Quality Control): SMT solder paste inspection (SPI), automated optical inspection (AOI), and acoustic frequency response screening during sub-assembly.
• FQC (Final Quality Control): Acoustic performance testing (THD < 1% @ 1kHz), RF conducted power test, Bluetooth pairing stability test, and charging current verification.

Reliability Testing Standards:

• Drop Test: 1.2-meter drop onto concrete floor (6 faces).
• Hinge Fatigue Test: Charging case lid open/close test (10,000 cycles).
• Temperature & Humidity Aging: 48 hours at 40C / 95% RH.
• Electrostatic Discharge (ESD): Contact +/- 6kV, Air +/- 8kV.
• Quality Standard: AQL 1.0 (Major), AQL 2.5 (Minor) inspection benchmark prior to container loading.

 

 

Inner Packaging: Recyclable pulp tray secured inside a rigid magnetic-closure retail box.

Master Carton Specs: 50 units per master export carton. Carton dimensions: 45 x 35 x 28 cm. Gross weight: 8.5 kg.

Logistics & Compliance: UN3481 lithium-ion batteries packed in compliance with Section II of PI967. Documentation provided includes MSDS, UN38.3, CE-RED, FCC-ID, and RoHS test reports for seamless customs clearance.

 

 

 

 

To receive a tiered quotation based on your target order volume, custom branding requirements, and shipping destination, submit your project specification to our factory engineering sales team.

Required RFQ Details: Target quantity, custom branding requirements, destination port, and desired delivery schedule.

Response Time: Technical and commercial proposals are returned within 24 business hours.

Hot Tags: apple-compatible dual-mode anc wireless earbuds, China apple-compatible dual-mode anc wireless earbuds manufacturers, suppliers, factory, air pod pro imitation, airpods max imitation, airpods pro 2nd generation imitation, apple airpods 2 imitation, apple earbuds imitation, Aripods Imitation