Apple-Compatible Noise-Cancelling Over-Ear Headphones

The apple-compatible noise-cancelling over-ear headphones is an over-ear active noise-cancelling (anc) headphone engineered for oem/odm brand clients targeting the mid-to-high consumer audio market. Engineered with native apple ecosystem compatibility, it integrates low-latency bluetooth 5.3 architecture, hybrid feedforward-feedback noise attenuation, and aac hardware decoding. Built for scalable batch production, it sustains acoustic and rf consistency across mass-manufacturing runs.

 

 

Specification Item	Technical Parameter
Acoustic Driver	40mm Neodymium Dynamic Driver, PET Diaphragm
Frequency Response	20Hz - 20,000Hz
Impedance	32 Ohm +/- 15% at 1kHz
ANC Performance	Hybrid Active Noise Cancellation: -38dB to -42dB attenuation (100Hz-1000Hz)
Bluetooth Chipset	Actions / JL / BES chipset configurations (Bluetooth 5.3 compliant)
Supported Audio Codecs	AAC, SBC
Battery Capacity	600mAh Rechargeable Lithium-Polymer Cell
Playback Time	50 hours (ANC OFF) / 35 hours (ANC ON) at 50% volume
Charging Interface	USB Type-C (5V/1A input; 10-minute quick charge yields 4 hours playback)
Microphone Array	Dual-mic Environmental Noise Cancellation (ENC) for voice transmission
Net Weight	258g
Regulatory Compliance	CE-RED, FCC-ID, RoHS, REACH, BQB (Bluetooth SIG), UN38.3, MSDS

 

 

Hybrid ANC Architecture: Dual microphones per earcup (feedforward and feedback) process ambient low-frequency and mid-frequency sound waves, achieving measurable -42dB attenuation in cabin and office environments.

Apple Ecosystem Integration: Native AAC decoding and RF impedance matching tuned for iOS and macOS devices, suppressing packet loss and audio stutter in crowded 2.4GHz spectrums.

Acoustic Distortional Control: 40mm neodymium transducers paired with precision-vented dampening chambers maintain Total Harmonic Distortion (THD) below 1% at 1kHz (94dB SPL).

Ergonomic Load Distribution: High-density memory foam cushions wrapped in protein PU leather, combined with an adjustable manganese spring-steel headband, exert a controlled clamping force of 3.2N.

Dual-Mic ENC Beamforming: Directional microphone algorithms isolate vocal frequencies from background wind and ambient chatter during VoIP and cellular communication.

 

 

Configured for volume deployment across commercial retail, enterprise communication, and travel channels:

 

 

Cell Specification: 3.8V Lithium-Polymer pouch cell with an integrated Protection Circuit Module (PCM) regulating overcharge, over-discharge, and short-circuits.

Capacity Retention: Retains >= 80% of nominal capacity following 500 standard charge-discharge cycles.

Power Management: Automatic power-down triggers after 10 minutes of Bluetooth link loss to prevent idle battery drain.

 

 

Vertically integrated manufacturing infrastructure supports tailored client specifications:

Firmware Configuration: Custom Bluetooth broadcast names, customized pairing tones, and proprietary EQ sound signatures.

Industrial Design (ODM): Custom housing geometry, specialized color injection molding, soft-touch matte rubber finishing, and anodized aluminum decorative plates.

Acoustic Calibration: Target frequency response curve adjustments matched to specific market demographics (e.g., consumer V-shaped or flat studio monitor tuning).

Packaging & Collateral: Custom retail gift boxes, serialized anti-counterfeit labels, and localized multi-language user manuals.

 

 

Raw Material Incoming Inspection (IQC)
↓
SMT PCB Assembly & Reflow Soldering
↓
Acoustic Driver Impedance Matching
↓
Acoustic Chamber Sealing & 24h Thermal Aging
↓
Electro-Acoustic Sweep & Bluetooth RF Testing (Shielded Room)
↓
Final Packaging & Carton Drop Test

Manufacturing Capacity: 6 SMT surface-mount lines and 4 dedicated acoustic assembly lines yielding a monthly output of 150,000 units.

Testing Standards:

• 100% electro-acoustic sweep testing via G.R.A.S. artificial ear test fixtures.
• Radio frequency (RF) output power and packet transmission verification in an isolated anechoic chamber.
• Mechanical reliability stress testing: Drop testing (1.2m onto hardwood), temperature/humidity cycling (-20°C to +55°C), and headband fatigue bend tests (5,000 cycles).

 

 

Inner Packaging: Custom die-cut molded pulp tray housed inside a 350g greyboard magnetic gift carton.

Master Carton Configuration: 20 units per export carton.

Carton Dimensions: 52cm x 44cm x 38cm

Gross Weight: 9.5 kg

Logistics & Hazardous Materials Compliance: Palletized sea freight (FOB Shenzhen / EXW) and air cargo available. Lithium-ion battery shipments comply with IATA Packing Instructions PI 967 (Section II) for equipment-contained cells.

 

 

 

 

Submit your project parameters to receive tiered wholesale pricing, sample availability, and engineering drawings:

• Contact Name / Company Name:
• Business Email / Phone Number:
• Target Order Volume (Units):
• Project Scope: [ ] Standard White-Label (MOQ 1,000) [ ] Custom Firmware/Colorway (MOQ 2,000) [ ] Custom ODM Tooling

Hot Tags: apple-compatible noise-cancelling over-ear headphones, China apple-compatible noise-cancelling over-ear headphones manufacturers, suppliers, factory, air pod pro imitation, airpods 2 imitation, airpods gen 3 imitation, airpods pro imitation, apple airpods imitation, apple airpods pro 2 imitation